Aehr Test Systems To Announce Third Quarter Fiscal 2025 Financial Results On April 8, 2025

FREMONT, CA / ACCESS Newswire / March 27, 2025 / Aehr Test Systems , a worldwide supplier of semiconductor test and burn-in equipment, today announced that it will report financial results for its third quarter of fiscal 2025 ended February 28, 2025 on Tuesday, April 8, 2025 following the close of the market. The Company will host a conference call and webcast at 5:00 p.m. Eastern time to discuss the results.

What: Aehr Test Systems third quarter fiscal 2025 financial results conference call.

When: Tuesday, April 8, at 5:00 p.m. Eastern Time (2:00 p.m. PT).

Dial in Number: To access the live call, dial +1 888-506-0062 (US and Canada) or +1 973-528-0011 (International) and give the participant passcode 197159.

Webcast: To access the live webcast, please visit the investor relations section at www.aehr.com.

Call Replay: A phone replay of the call will be available approximately two hours following the end of the live call and will remain available for one week. To access the call replay, dial +1 877-481-4010 (US and Canada) or +1 919-882-2331 (International) and enter replay passcode 52138.

About Aehr Test Systems

Headquartered in Fremont, California, Aehr Test Systems is a leading provider of test solutions for testing, burning-in, and stabilizing semiconductor devices in wafer level, singulated die, and package part form, and has installed thousands of systems worldwide. Increasing quality, reliability, safety, and security needs of semiconductors used across multiple applications, including electric vehicles, electric vehicle charging infrastructure, solar and wind power, computing, advanced AI processors, data and telecommunications infrastructure, and solid-state memory and storage, are driving additional test requirements, incremental capacity needs, and new opportunities for Aehr Test products and solutions. Aehr has developed and introduced several innovative products including the FOX-PTM families of test and burn-in systems and FOX WaferPakTM Aligner, FOX WaferPak Contactor, FOX DiePak® Carrier and FOX DiePak Loader. The FOX-XP and FOX-NP systems are full wafer contact and singulated die/module test and burn-in systems that can test, burn-in, and stabilize a wide range of devices such as leading-edge silicon carbide-based and other power semiconductors, 2D and 3D sensors used in mobile phones, tablets, and other computing devices, memory semiconductors, processors, microcontrollers, systems-on-a-chip, and photonics and integrated optical devices. The FOX-CP system is a low-cost single-wafer compact test solution for logic, memory and photonic devices and the newest addition to the FOX-P product family. The FOX WaferPak Contactor contains a unique full wafer contactor capable of testing wafers up to 300mm that enables IC manufacturers to perform test, burn-in, and stabilization of full wafers on the FOX-P systems. The FOX DiePak Carrier allows testing, burning in, and stabilization of singulated bare die and modules up to 1024 devices in parallel per DiePak on the FOX-NP and FOX-XP systems up to nine DiePaks at a time. Acquired through its acquisition of Incal Technology, Inc., Aehr's new line of high-power packaged part reliability/burn-in test solutions for Artificial Intelligence (AI) semiconductor manufacturers, including its ultra-high-power Sonoma family of test solutions for AI accelerators, GPUs, and high-performance computing (HPC) processors, position Aehr within the rapidly growing AI market as a turn-key provider of reliability and testing that span from engineering to high volume production. For more information, please visit Aehr Test Systems' website at www.aehr.com.

# # #

Contacts:

Aehr Test Systems

Chris Siu

Chief Financial Officer

csiu@aehr.com

PondelWilkinson, Inc.

Todd Kehrli or Jim Byers

Analyst/Investor Contact

tkehrli@pondel.com

jbyers@pondel.com

SOURCE: Aehr Test Systems

View the original press release on ACCESS Newswire

Aehr Test Systems said Thursday that it had received $4.7 million in initial follow-up production orders from an unidentified storage device supplier.

The company said the orders include multiple "FOX-CP" systems as well as "WaferPak Contactors," which will be used for test and burn-in of production devices.

Aehr said it expects shipment to start in the next three to four months.

The company also said the customer has indicated plans to order additional "FOX-CP" production systems in fiscal Q4, potentially making the customer a 10% revenue contributor.